Page 26 - Robo_Genius_V1.0_flipbook_C1

• Magnetic Board: A magnetic board is a flat
surface where you can stick magnetic parts, like

lights and wires, to build fun projects. It helps
hold everything together while you work.

• USB Cable: A USB cable is a wire that connects

things, like charging your tablet or linking a

toy to your computer. It helps electricity or
information move between them.

• Battery OTG Socket: This is a special connector that helps the battery

send power to other parts, like when
you plug something into the wall to

charge.

• Jumper Wire: Jumper wires are little
colourful wires that connect parts

together, like linking a battery to a
light, so electricity can move through your project.

Creating a RGB Light Circuit Using Smart Circuit Kit

To create RGB light circuit using smart circuit kit, we use the following

steps:

Step 1 Take out all the components from the smart circuit kit—
• RGB LED • Resistor • Battery

• Magnetic Board • USB Cable

• Battery OTG Socket • 2 Jumper

Step 2 Place the RGB LED module on the magnetic board. Then, place
the resistor module in series with the RGB LED on the board.

Step 3 Connect the battery. Attach the positive terminal of the battery

to the RGB LED, and the negative terminal to the resistor.

24 RoboGenius (V1.0)-I