Page 50 - Robo_Genius_V1.0_flipbook_C6

Component Required

Small C x 2 Medium Plate x 1 60T Gear x 1 Motor x 1 Small L x 1

Adapter x 1 Power Distribution Remote x 1 Small Bar x 2 Data Cable x 1
board x 1

Small Bolts x 13 Motor Shaft x 1 Axle Lock x 1 Nuts x 13

Follow the Robo Fan Assembly Steps

Step 1 Begin by taking two small “C” plates and placing them
according to the image.

Step 2 Next, take a medium plate
and secure it on top of the
small “C” plates using four
small bolts as depicted in the
image.
Step 3 Proceed by taking a small “L” plate and positioning it as
shown in the image.

Step 4 Attach the motor shaft to the motor and place it on the
small L-shaped bracket using the screws provided with the
motor.

Step 5 Take two small bars and attach them to the 60T gear in opposite
directions using nuts and bolts, as shown in the image.

Step 6 Now, attach the axle lock to the 60T gear and motor, and
tighten it with the screw so that the gear can move easily.

48 RoboGenius (V1.0)-VI