Page 53 - Robo_Genius_V1.0_flipbook_C6

Motor x 1 C Holder x 2 Power Distribution Remote x 1 Nut x 25
board x 1

Small Bolt x 25 Motor Shaft x 1 Adapter x 1 Small Bar x 1 Data Cable x 1

Axle Lock x 1 60T Gear x 1 Spacer x 1 Small Shaft x 1 Hook x 1

Follow the Robo Crane Assembly Steps

Step 1 Take a medium plate as shown in the image.

Step 2 Connect the two small “C” plates above the medium plate using
small bolts and nuts.

Step 3 Place two C holders on the small “C” plate as shown in the image.

Step 4 Place a Small “L” Plate between the C holders as shown in the image.

Step 5 Take a small plate and fix it on top of the small “L” plate using small
bolts and nuts.

Step 6 Attach the motor to the motor shaft and secure it onto the small
plate using the screw provided with the motor.

Step 7 Place the 12T gear on the motor shaft, then install the spacer and
axle lock as shown in the image.

Mechanical Concepts with Mechatron Kit 51