Page 60 - Robo_Genius_V1.0_flipbook_C7

Adapter x 1 Power Distribution Remote x 1 Small Bar x 2 Data Cable x 1
board x 1

Small Bolts x 13 Motor Shaft x 1 Axel Lock x 1 Nuts x 13

Follow the Robo Fan Assembly Steps

Step 1 Begin by taking two small “C” plates and placing them
according to the image.

Step 2 Next, take a medium plate and secure it on top of the small
“C” plates using four small bolts as depicted in the image.
Proceed by taking a small “L” plate and positioning it as
shown in the image.

Step 3 Attach the motor shaft to the motor and place it on the small L-shaped bracket using the
screws provided with the motor.

Step 4 Take two small bars and attach them to the 60T gear in opposite
directions using nuts and bolts, as shown in the image.

Step 5 Now, attach the axle lock to the 60T gear and motor, and
tighten it with the screw so that the gear can move easily.

58 RoboGenius (V1.0)-VII