Page 66 - Robo_Genius_V1.0_flipbook_C7

Component Required

Small C x 2 Medium Plate x 1 Small Plate x 1 12T Gear x 1 Small L x 1

Motor x 1 C Holder x 2 Power Distribution Remote x 1 Nut x 25
board x 1

Small Bolt x 25 Motor Shaft x 1 Adapter x 1 Small Bar x 1 Data Cable x 1

Axel Lock x 1 60T Gear x 1 Spacer x 1 Small Shaft x 1 Hook x 1

Follow the Robo Crane Assembly Steps

Step 1 Take a medium plate as shown in the image.

Connect the two small “C” plates above the medium plate using
small bolts and nuts.
Place two C holders on the small “C” plate as shown in the image.

Place a Small “L” Plate between the C holders as shown in the image.

Step 2 Take a small plate and fix it on top of the small “L” plate using small
bolts and nuts.

Step 3 Attach the motor to the motor shaft and secure it onto the small
plate using the screw provided with the motor.

64 RoboGenius (V1.0)-VII