Page 67 - Robo_Genius_V1.0_flipbook_C7

Step 4 Place the 12T gear on the motor shaft, then install the spacer and
axle lock as shown in the image.

Connect the 60T gear using axel lock and a small shaft as shown
the image.
Connect a small “L” plate on 60T gear using a
small bolt and nut as shown in the image.

Attach the motor to the motor shaft
and secure it on the small ‘L’ bracket
using the screw provided with the
motor. Place the shaft locker on the
motor shaft as shown.

Connect the two small bars using nuts
and small bolts.

Finally, connect a hook as shown in the image.
Step 5 Connect the motor’s wire to the power distribution
board, connect the power distribution board to the remote using a data cable, Now, plug
the adapter into the socket and connect it with the remote to power the Robo Crane.

Concepts

Understanding Motion: Exploring concepts of movement, speed, and direction as they relate to
the crane’s arm and hook.

Forces and Stability: Discussing the forces acting on the crane, including gravity and balance
when lifting different loads.

Mechanical Concepts with Mechatron Kit 65