Page 40 - Robo_Genius_V1.0_flipbook_C8

Step 8 Insert the RGB LED into the breadboard as shown in the image.

Step 9 Insert three switches into the breadboard as shown in the image.

Step 10 Connect one end of a 220-ohm resistor to the
second pin of the RGB LED and the other end to the
positive rail as shown in the image. Also, use a wire
to connect the first five pairs of holes of the positive
rail to the next five. Pin 4 Pin 3

Pin 5 Pin 2
Pin 1 Pin 6

Pin 1 Pin 2

38 RoboGenius (V1.0)-VIII