Page 42 - Robo_Genius_V1.0_flipbook_C8

Circuit Setup Steps for Common Cathode RGB LED

Follow the steps from Step 1 to Step 9 mentioned above.

Step 10 Connect one end of a 220-ohm resistor to the second pin of the RGB LED and the other end
to the negative rail, as shown in the image.

Step 11 Connect the first pin of the first switch to the positive rail and the second pin to the first
pin of the RGB LED.

Pin 1 Pin 2

Step 12 Connect the first pin of the second switch to the positive rail and the second pin to the third
pin of the RGB LED.

Pin 1 Pin 2

40 RoboGenius (V1.0)-VIII