Page 81 - Robo_Genius_V1.0_flipbook_C8

Step 5 Take a small plate and fix it on top of the small “L” plate using small
bolts and nuts.

Step 6 Attach the motor to the motor shaft and secure it onto the small
plate using the screw provided with the motor.

Step 7 Place the 12T gear on the motor shaft, then install the spacer and
axle lock as shown in the image.

Step 8 Connect the 60T gear using axel lock and a small shaft as shown
in the image.

Step 9 Connect a small “L” plate on 60T gear using a small bolt and nut
as shown in the image.

Step 10 Attach the motor to the motor shaft and secure it on the small ‘L’
bracket using the screw provided with the motor. Place the shaft
locker on the motor shaft as shown.

Step 11 Connect the two small bars using nuts and small bolts.

Mechanical Concepts with Mechatron Kit 79