Page 88 - Robo_Genius_V1.0_flipbook_C8

Small Small x 20 Motor Shaft x 2 Adapter x 1 Nut x 20

Follow the Robot Assembly Steps

Step 1 Take two small “C” plates and place them as shown in the image.

Step 2 Attach the motor to the motor shaft and secure it on the small
‘C’ bracket using the screw provided with the motor.

Step 3 Take a medium plate and fix it above the small “C” plates using
small bolts and nuts, following the image.

Step 4 Take a small plate and fix it in front of the medium plate using
small bolts and nuts, as per the image.

Step 5 Take a small “L” plate and fix it as shown in the image.

Step 6 Take a caster strip and caster wheel, and connect them using
small bolts and nuts as shown in the image. Then, take two wheels
and connect them to the motor shaft.

Step 7 Now, as shown in the image, connect the controller board (brain
module) and LDR module from above using small bolts and nuts.

86 RoboGenius (V1.0)-VIII